I had some gasket problems with my timming cover after my rebuild (after ~2000 miles on it)...one thing lead to another and I ended up pulling my head off and redoing the head gasket. Since the head was off I wanted to make sure that it was stright. I took it to the machine shop to make darn sure it was stright...They didn't find anything wrong with it and gave it back...no charge since they didn't have to machine it. Doesn't hurt to try. You never know maybe nothing is wrong with the head you just need to reinstall it. Good luck <img src="/forums/images/graemlins/cheers.gif" alt="" />