Replacing front oil seal.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Replacing front oil seal. #843854 10/27/07 01:38 AM

Joined: Sep 2007

Posts: 17

Nebraska

rednec_d

Need a Spot

ok i got the 2.3 diesel truck torn down: radiator pulled, fan pulled, belts gone, and front pully on crankshaft off. now im hung up on the back pully on the crank shaft. i cant pull the bottom timing cover till i pull this it seams. is there a special way to remove this.

Fueled by a 20/50 mix of stupidity and insanity

Entire Thread
Subject	Posted By	Posted
Replacing front oil seal.	rednec_d	10/27/07 01:38 AM
Re: Replacing front oil seal.	hazy_daze	10/27/07 01:57 PM
Re: Replacing front oil seal.	rednec_d	10/27/07 10:04 PM
Re: Replacing front oil seal.	hazy_daze	10/28/07 02:26 PM
Re: Replacing front oil seal.	torquemonster	10/28/07 07:18 PM
Re: Replacing front oil seal.	rednec_d	10/29/07 01:03 AM
Re: Replacing front oil seal.	Mikewarme	10/29/07 10:58 PM
Re: Replacing front oil seal.	rednec_d	10/30/07 10:15 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.095s Queries: 15 (3.643s) Memory: 0.6082 MB (Peak: 0.6411 MB) Data Comp: Off Server Time: 2026-06-23 06:43:54 UTC
Valid HTML 5 and Valid CSS