Replacing front oil seal.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Replacing front oil seal. [Re: hazy_daze] #843858 10/28/07 07:18 PM

Joined: Jan 2005

Posts: 1,538

Red Deer, Alberta

torquemonster Offline

Body Damage is Cool

yea on my 2.5 Pajero the front crank stub had some rust on it...took me about 3 hours to get the pulley off without damaging it. a little scotchbrite and some moly paste made it like new again...next time should be a breeze. you should get yourself some moly paste, it is the most amazing stuff.

Entire Thread
Subject	Posted By	Posted
Replacing front oil seal.	rednec_d	10/27/07 01:38 AM
Re: Replacing front oil seal.	hazy_daze	10/27/07 01:57 PM
Re: Replacing front oil seal.	rednec_d	10/27/07 10:04 PM
Re: Replacing front oil seal.	hazy_daze	10/28/07 02:26 PM
Re: Replacing front oil seal.	torquemonster	10/28/07 07:18 PM
Re: Replacing front oil seal.	rednec_d	10/29/07 01:03 AM
Re: Replacing front oil seal.	Mikewarme	10/29/07 10:58 PM
Re: Replacing front oil seal.	rednec_d	10/30/07 10:15 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.525s Queries: 16 (3.522s) Memory: 0.6082 MB (Peak: 0.6412 MB) Data Comp: Off Server Time: 2026-06-22 09:20:18 UTC
Valid HTML 5 and Valid CSS