starter with standerd bolts

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: starter with standerd bolts [Re: missouriman] #844415 10/31/07 02:56 AM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

Probably the 10mm through bolt, could be someone swapped it for a 3/8" bolt at some time, after losing the original. Should work fine, that bolt just holds the starter in place (clamping force), does not really locate it or anything precise.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
starter with standerd bolts	89toyOn35s	10/31/07 12:47 AM
Re: starter with standerd bolts	Bogo	10/31/07 02:11 AM
Re: starter with standerd bolts	missouriman	10/31/07 02:47 AM
Re: starter with standerd bolts	4Crawler	10/31/07 02:56 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.113s Queries: 16 (3.602s) Memory: 0.6001 MB (Peak: 0.6331 MB) Data Comp: Off Server Time: 2026-06-05 06:05:50 UTC
Valid HTML 5 and Valid CSS