I have a 93 runner that I plan on running 34x10.50 swamper ltb's on. I am thinking of using 2" ball joint spacers up front and springs/spacers in the rear. I have the factory aluminum rims and I'm not sure if they would clear with the ball joint spacers (I'm not afraid to do a little grinding). If I had to run a rim with more offset, I would probably go with an 8" wide rim. I've had many toyota's before, but haven't ever used the spacers, or run this tire/rim/lift combo. I am thinking of also installing a 2" body lift (Roger Brown of course) and feel that this should be plenty of clearance. I was just wondering if anyone else was running this type of setup.