3.4 swap idle problems

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3.4 swap idle problems [Re: JLEMOND] #845331 11/15/07 06:55 AM

Joined: Sep 2006

Posts: 43

BillW

Getting the Wheeling Fever

Thanks guys, I went to like 3 different hydraulic hose places when I started this project none of them had the banjo fitting and none did repairs. That was like 3 or 4 months ago. I spent all day looking today and finally the 4th place I went to actually did repairs. They cut the old collars off and crimped new ones with new hoses on the old fittings, all for $60. Thanks again for all the input.

91 LS Trooper 3.4 w/225k
BillWhitbeck@grovesigncompany.com

Entire Thread
Subject	Posted By	Posted
3.4 swap idle problems	BillW	11/04/07 07:08 PM
Re: 3.4 swap idle problems	Crazz	11/04/07 07:38 PM
Re: 3.4 swap idle problems	Ed Mc	11/05/07 04:53 AM
Re: 3.4 swap idle problems	BillW	11/14/07 07:23 AM
Re: 3.4 swap idle problems	barak	11/14/07 08:21 PM
Re: 3.4 swap idle problems	JLEMOND	11/15/07 01:53 AM
Re: 3.4 swap idle problems	BillW	11/15/07 06:55 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.529s Queries: 16 (3.527s) Memory: 0.6050 MB (Peak: 0.6380 MB) Data Comp: Off Server Time: 2026-06-01 05:26:24 UTC
Valid HTML 5 and Valid CSS