|
|
|
|
 sas question
#845448
11/05/07 07:23 AM
|
Joined: Jul 2002
Posts: 331
OP
Mudrunner
|
i've got a 2wd 99 sport that i want to do sas on.
anyone know if a divorced setup would work? i've peeked underneath and seems like it should. any reason to not use one?
thanks
|
|
|
Re: sas question
[Re: Spawn_818]
#845449
11/05/07 09:03 AM
|
Joined: Sep 2001
Posts: 8,557
Forum Moderator
|
Sounds like it will work fine as long as you put a good crossmember under it. We need pics of this proposed plan.
87 Raider 4D56td v5MT1
31's..Basically Stock
|
|
|
Re: sas question
[Re: Spawn_818]
#845450
11/05/07 03:40 PM
|
Joined: Feb 2001
Posts: 913
Rock Warrior
|
Might consider an NP231 instead of a divorced set-up. Not sure, though, what the output of a 2WD tranny looks like and whether it can be adapted. Also, for some info on an SAS for the Sport (or other Montys), check out 4X4 Extreme Sports.
Lee
'94 LS, 3.0 V6, Auto, completely stock
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.307s Queries: 15 (0.003s) Memory: 0.5931 MB (Peak: 0.6463 MB) Data Comp: Off Server Time: 2026-06-21 21:26:25 UTCValid HTML 5 and Valid CSS 
