Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
oxygen sensors 95 4runner #845489 11/05/07 04:43 PM
Joined: Aug 2007
Posts: 25
C
carook Offline OP
Getting the Wheeling Fever
Have got 95 4runner with 3.0 engine. Truck has 102,000 miles on it. I have had truck since 2001 and had 50,0000 miles on it when I bought it. So I don't think they have ever been changed. Question is where is a good place to buy them. And any insight on installing them. Thanks

Re: oxygen sensors 95 4runner [Re: carook] #845490 11/05/07 04:51 PM
Joined: Jan 2000
Posts: 12,153
4Crawler Offline
Web Wheeler
*****
http://www.sparkplugs.com/ is a good source for the Denso brand sensors. The nuts holding the old ones on can be tough to remove due to corrosion. Start soaking them with a good penetrating oil like PB Blaster or Kroil.


Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5850 MB (Peak: 0.6327 MB) Data Comp: Off Server Time: 2026-06-23 16:17:57 UTC
Valid HTML 5 and Valid CSS