Oil pan gasket install

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Oil pan gasket install [Re: TrooperII] #845710 11/08/07 01:45 AM

Joined: Sep 2003

Posts: 1,214

JLEMOND

Body Damage is Cool

THE 1.9 ENGINES DID USE A LARGE RUBBER GASKET BUT THE 2.3 AND THE 2.6 INLY USE THE HALF MOON SEALS AT THE END OF THE CRANKCASE. THEY MUST BE USED THERE THE REST OF THE SURFACE WHERE THE MAIN PAN BOLTS TO THE BLOCK USES SILICON SEALER, ,THE BOTTOM PAN ,THE SMALL ONE DOES HAVE A GASKET ON IT . JERRY

Entire Thread
Subject	Posted By	Posted
Oil pan gasket install	TrooperII	11/06/07 04:59 PM
Re: Oil pan gasket install	JLEMOND	11/07/07 02:37 AM
Re: Oil pan gasket install	TrooperII	11/07/07 06:12 AM
Re: Oil pan gasket install	JLEMOND	11/08/07 01:45 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.445s Queries: 16 (3.443s) Memory: 0.5988 MB (Peak: 0.6318 MB) Data Comp: Off Server Time: 2026-06-04 16:38:26 UTC
Valid HTML 5 and Valid CSS