Do crank shaft position sensors need to be adjusted?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Do crank shaft position sensors need to be adjusted? [Re: 93jeepcher] #845729 11/06/07 10:05 PM

Joined: Oct 2003

Posts: 7,768

Central Texas

BigJim

Web Wheeler

If you still have the old one look at it and observe how the adjustment MIGHT be made..
Big JIm <img src="/forums/images/graemlins/pfft.gif" alt="" />

professional bovine relocation specialist

Entire Thread
Subject	Posted By	Posted
Do crank shaft position sensors need to be adjusted?	93jeepcher	11/06/07 09:43 PM
Re: Do crank shaft position sensors need to be adjusted?	BigJim	11/06/07 10:05 PM
Re: Do crank shaft position sensors need to be adjusted?	cuervo25	11/06/07 11:57 PM
Re: Do crank shaft position sensors need to be adjusted?	93jeepcher	11/07/07 01:31 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.566s Queries: 16 (3.563s) Memory: 0.5965 MB (Peak: 0.6295 MB) Data Comp: Off Server Time: 2026-06-24 05:45:25 UTC
Valid HTML 5 and Valid CSS