ECM for 3.4 swap

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

ECM for 3.4 swap #845852 11/07/07 04:36 PM

Joined: Sep 2006

Posts: 43

BillW

Getting the Wheeling Fever

I've had some problems with my idle in my 3.4 swap and I havn't gotten to all the things I've been told to do and check yet but I I've been thinking about changing ECM's and I thought I better start looking now. Is it the ECM out of 91 and 92 3.1 Rodeo's that I need and are they a direct swap, do I need to do anything else? And does anyone know where I can get a remaned one reasonable or know anyone with a good used one?

91 LS Trooper 3.4 w/225k
BillWhitbeck@grovesigncompany.com

Entire Thread
Subject	Posted By	Posted
ECM for 3.4 swap	BillW	11/07/07 04:36 PM
Re: ECM for 3.4 swap	Richard Saylor	11/07/07 04:57 PM
Re: ECM for 3.4 swap	Storm Trooper	11/07/07 08:22 PM
Re: ECM for 3.4 swap	jacktoad	11/11/07 05:53 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 9.493s Queries: 15 (3.478s) Memory: 0.5993 MB (Peak: 0.6323 MB) Data Comp: Off Server Time: 2026-06-21 16:45:23 UTC
Valid HTML 5 and Valid CSS