Re-doing the whole 9 on the front (4x4, etc...)

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Re-doing the whole 9 on the front (4x4, etc...) [Re: BG98EX] #845947 11/08/07 04:47 PM

Joined: Aug 2001

Posts: 5,527

san antonio, TX

Dave Scott Offline

Trail Leader

calipers could be sticking, but the wheel bearings could also be worn, so, check both, grease both, tighten both. if the bearings look worn when you remove them, replace them.

95 Sportage w/welded and 5.89 geared dana 44's on 38.5" TSL's.- SADLY SOLD
CURRENTLY - 2000 sportage, 5.38 gears, welded diffs, 35" tires, 5.5" lift

http://www.cardomain.com/ride/341410

Entire Thread
Subject	Posted By	Posted
Re-doing the whole 9 on the front (4x4, etc...)	BG98EX	11/08/07 02:05 AM
Re: Re-doing the whole 9 on the front (4x4, etc...)	Dave Scott	11/08/07 04:47 PM
The Caliper	BG98EX	11/09/07 06:23 PM
The bearings	BG98EX	11/09/07 06:27 PM
Re: The bearings	Dave Scott	11/09/07 06:59 PM
Re: The bearings	KIAFREEKROB	11/10/07 04:42 AM

Moderated by 4x4Wire, Axe Man, DamKia

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.687s Queries: 16 (3.535s) Memory: 0.6033 MB (Peak: 0.6363 MB) Data Comp: Off Server Time: 2026-06-19 12:31:10 UTC
Valid HTML 5 and Valid CSS