Toe In Adjustment.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Toe In Adjustment. [Re: elripster] #846009 11/09/07 08:27 AM

Joined: Dec 2006

Posts: 22

grub

Need a Spot

Thanks everyone, since this old beast has over 300.000 km on the clock I thought I would set the toe in on the fat side at 3/32nd". which I've been told is .09375". plenty tight enough considering the worn rack end I just replaced resulted in 1/2 to 3/4" of slack at the right front wheel.

The following measurments are from this same post made at another site and may be useful on this subject.

1/16" = 4/64" = .0625"

5/64" = .078125"

3/32" = 6/64" = .09375

Entire Thread
Subject	Posted By	Posted
Toe In Adjustment.	grub	11/08/07 09:12 AM
Re: Toe In Adjustment.	Davepet	11/08/07 10:15 AM
Re: Toe In Adjustment.	elripster	11/08/07 04:32 PM
Re: Toe In Adjustment.	Dandeman	11/08/07 11:46 PM
Re: Toe In Adjustment.	elripster	11/09/07 01:35 AM
Re: Toe In Adjustment.	elripster	11/09/07 03:06 AM
Re: Toe In Adjustment.	grub	11/09/07 08:27 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.411s Queries: 16 (3.409s) Memory: 0.6055 MB (Peak: 0.6385 MB) Data Comp: Off Server Time: 2026-05-31 19:13:14 UTC
Valid HTML 5 and Valid CSS