Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
P0135 Fault Code 1998 Montero #846548 11/11/07 03:08 AM
Joined: Apr 2007
Posts: 49
R
RaideroftheLostArk Offline OP
Getting the Wheeling Fever
I recently rented a Actron Scanner from Autozombie and pluged it into the OBDII. The code read "P0135-Heater sensor, bank 1, side 1). I think that has to do with the O2 sensor, but I know that there are about four of them on the car. Does anyone know exactly which one I should replace? I did a search and found a little information on the wire, but nothing that helped me specifically. All I found was that it might be the first sensor on the side with the cylinder one. Any ideas? Any thoughts would be greatly appreciated. Thanks! <img src="/forums/images/graemlins/scared.gif" alt="" />


1991 Montero 3.0 V6 LSD, 31x10.50 BFG All Terrains
Re: P0135 Fault Code 1998 Montero [Re: RaideroftheLostArk] #846549 11/11/07 04:24 AM
Joined: Oct 2004
Posts: 6,332
52degrees Offline
Trail Leader
****
Pre-catalyst, Bank 1.

This means that it's on the side with cylinder #1, in front of the cat converter. I'd use a test light with the key on to confirm that the heater circuit is complete and getting power, and if it is, replace the O2 sensor.

While you're at it, replace the other 3. They won't be far behind...


1990 Montero RS (In pieces... for now)

KG6VNX







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.013s Queries: 15 (0.010s) Memory: 0.5877 MB (Peak: 0.6363 MB) Data Comp: Off Server Time: 2026-11-18 03:48:06 UTC
Valid HTML 5 and Valid CSS