I went through a ton of different posts on the search looking for exactly how to do this. I actually didn't even know this was an option until I was browsing through some lift searches. I am aware that there is a nut for the passenger side as well, but thanks for being clarifying. So is it when you tighten the torsion bars that you gain lift? I was planning on jacking the front end up so the wheel was about 1.5 inches off the ground, and cranking the torsion bar until the wheel was touching, repeat on the other side. Drive it around for a bit then measuring the make sure they were both the same. Does this sound good? What's the max you can do this? With out having a horrible ride?

Thanks for all the advise!