|
|
Group Buy: Trail-Gear Rock Sliders
#847756
11/19/07 05:33 PM
|
Joined: Feb 2002
Posts: 3,548
OP
Roll Me Over
|
Whats up guys, I'm from the Mitsu Section of the forum and interested in buying a set of Trail Gear Sliders made for a 84- 88 Xtra Cab that also fit my Gen II Montero. Seeing if there is anymore interest for these sliders for a group buy? Heres what they look like on a Montero over on this post. Sliders on a Montero Heres the site to Trail-Gear Trail-Gear Post here or over on the Mitsu section if you'd like or just e mail me so I know how many are interested. Thanks, Angelo APKouts@aol.com
99JAOS2"& OME 2"body 4.90s ARB HS9500i Skids&Ladder 16"315BFG JAOSRemote& Rack 3Row Rad IPF back& Searchlite HID Overhead Console/CB switchPanel FrARB RrLocker TJMSnorkel 160AAlt Sliders 2nd Tranny Cooler QuickAirII& Tank Rear frame/tank Lift
|
|
Re: Group Buy: Trail-Gear Rock Sliders
[Re: Angelo]
#847757
11/27/07 06:56 PM
|
Joined: Feb 2002
Posts: 3,548
OP
Roll Me Over
|
wrote an e mail to trail-gear. A few Monteros on the other board are interested, but might be after christmas, but could be sooner.
I'm sure even if there are others interested with different sizes, I bet they would still give us a decent deal.
Wanted to get a head count of the ones "kinda" interested.
99JAOS2"& OME 2"body 4.90s ARB HS9500i Skids&Ladder 16"315BFG JAOSRemote& Rack 3Row Rad IPF back& Searchlite HID Overhead Console/CB switchPanel FrARB RrLocker TJMSnorkel 160AAlt Sliders 2nd Tranny Cooler QuickAirII& Tank Rear frame/tank Lift
|
|
Re: Group Buy: Trail-Gear Rock Sliders
[Re: Angelo]
#847758
11/29/07 06:31 AM
|
Joined: Oct 2000
Posts: 669
Rock Warrior
|
Sliders are priced OK.. any idea on ballpark shipping costs? Those can kill deals these days.
22REturbo.net 1988 4Runner 22RTE core, turbocharged, megasquirted...
|
|
Re: Group Buy: Trail-Gear Rock Sliders
[Re: dcg9381]
#847759
11/29/07 03:57 PM
|
Joined: Sep 2005
Posts: 970
Rock Warrior
|
dcg has a good point on the shipping. To be honest even with what discount you get with the group buy (which can't be too much, gievn that the price of materials is fixed), by the time you add shipping, it might be easier to just get some made locally. There are tons of guys here in NC that will make you some identical rockers, even in the Charlotte area. only difference is having to pay tax... but if you dig around you can find a local backyard guy who will, er, um, include it in the price...
I'm not knocking the Trail-gear equipment or trying to discourage business from them... just thinking out loud on the practicality of it, since we (on this board) are spread all over the place. More practical "group buy" would be you and 10 guys from Charlotte going in together, so it can all be shipped together at lower cost per unit.
With 200+ Billion electrical parts, the world most complicated machine is inside your own skull.
Question Reality. ----------------------------- '89 Rnr DLX "SR4.5", 32s w/ 5.29 locked f/r blah blah
|
|
Re: Group Buy: Trail-Gear Rock Sliders
[Re: RatLabGuy]
#847760
11/30/07 03:53 AM
|
Joined: Oct 2002
Posts: 15,887
Toyota & Classifieds Moderator
|
That's true; seems the NC ttora is down there. Check with your local wheeling clubs. Good suggestion, really.
Angelo, I can move this down into OT; you know we have a few Carolinians here. LMK.
http://www.walkablecommunities.org/Democracy is two wolves and a lamb voting on what to have for dinner. Liberty is a well-armed lamb contesting the vote. **ubi apis- ibi salus**
|
|
Re: Group Buy: Trail-Gear Rock Sliders
[Re: kewlynx]
#847761
11/30/07 05:16 AM
|
Joined: Aug 2003
Posts: 2,854
Roll Me Over
|
Dude, theyre super cheap as they are, you want a group buy? there is a lenght and a half of tube there, and that itself is 70 bucks... plus bending, notching and welding, i'd NEVER be able to sell sliders at that price (those tools are expensive).... How much cheaper do you think you can get it? i bet if you didnt buy coffee for a week it'd be the same amount. i'm not knocking your group buy, but those are cheap as-is.
89 4Runner 3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim
|
|
Re: Group Buy: Trail-Gear Rock Sliders
[Re: Greg_Canada]
#847762
11/30/07 04:58 PM
|
Joined: Feb 2002
Posts: 3,548
OP
Roll Me Over
|
yeah, knew they were already cheap enough. It was brought up in the Mitsu section, there were some that expressed interest so figured "what the hell" might as well purchase it the same time and knock a few off, but seeing there wasnt as much interest, I purchased them 2 days ago. Great company! I asked about 2 extra legs (since my Montero is alot heavier than a 84- 88 Yota) and they just threw it in at no charge <img src="/forums/images/graemlins/kewl.gif" alt="" />
I was just thinking out loud when I posted this and let everyone know and put it out on the table and available to those who do "wait" for group buys. But it was at such a good price, I decided to buy.
So while on topic, what is the difference with HREW metal and DOT (I think thats correct) metal? Are they that much stronger/weaker?
99JAOS2"& OME 2"body 4.90s ARB HS9500i Skids&Ladder 16"315BFG JAOSRemote& Rack 3Row Rad IPF back& Searchlite HID Overhead Console/CB switchPanel FrARB RrLocker TJMSnorkel 160AAlt Sliders 2nd Tranny Cooler QuickAirII& Tank Rear frame/tank Lift
|
|
Re: Group Buy: Trail-Gear Rock Sliders
[Re: Angelo]
#847763
11/30/07 08:43 PM
|
Joined: Jan 2000
Posts: 12,153
Web Wheeler
|
DOM is Drawn Over Mandrel or forming dies that flatten out the weld seam and the cold working of the tubing makes it stronger: http://www.davesport.com/cgi-bin/davesport/specs.htmlProbably on sliders, not really a big issue. Given a decent wall thickness, a HREW tube should be fine, unless the weld seam is placed to the outside or the bottom where it migh split under a heavy impact.
|
|
Re: Group Buy: Trail-Gear Rock Sliders
[Re: 4Crawler]
#847764
12/06/07 07:04 PM
|
Joined: Jul 2006
Posts: 230
Wheeler
|
I want the job that their offering. That sounds exactly what I want to do. To bad I'm still in school and don't have 5 years experience. The solidworks is comming along though I'm getting better. Trail-Gear is proud to announce that a new position is now available in our Engineering Department. Trail-Gear is seeking a self-motivated Mechanical Engineer with 5 years minimum experience in the off-road industry. Individual should have extensive experience with Solidworks 3D modeling software and Microsoft Office applications. A relocation package is available depending on location. Please send resumes to hr@trail-gear.com
87 Toyota 4Runner-RV Head, Custom Grind Cam, Doug Thorley Header, Keith Black Pistions, 2 1/4" Magnaflow cat, Dynomax Exhaust 2003 Toyota Matrix XRS-Injen CAI
|
|
Re: Group Buy: Trail-Gear Rock Sliders
[Re: GOI87]
#847765
12/08/07 02:51 AM
|
Joined: Jul 2000
Posts: 2,191
Body Damage is Cool
|
Not to hijack, but my dad is having a guy in Charlotte build him a front bumper for his TJ for about 1/2 of what most of them cost. He's an ex Toyota tech that just opened his own shop (CT Offroad) and does alot of custom Yotas. I can get his # if anyone is interested...
'87 4-Runner--DD/wheeler, 4.3 swap coming soon '89 Supra--E85 powered 2jz NA-T Swap, 533rwhp 497ft-lbs '89 Festiva, turboed BP swap powered by megasquirt
|
|
|
|