Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 3 1 2 3
Group Buy: Trail-Gear Rock Sliders #847756 11/19/07 05:33 PM
Joined: Feb 2002
Posts: 3,548
Angelo Offline OP
Roll Me Over
***
Whats up guys, I'm from the Mitsu Section of the forum and interested in buying a set of Trail Gear Sliders made for a 84- 88 Xtra Cab that also fit my Gen II Montero. Seeing if there is anymore interest for these sliders for a group buy?

Heres what they look like on a Montero over on this post.
Sliders on a Montero

Heres the site to Trail-Gear
Trail-Gear

Post here or over on the Mitsu section if you'd like or just e mail me so I know how many are interested. Thanks,
Angelo
APKouts@aol.com


99JAOS2"& OME 2"body 4.90s ARB HS9500i Skids&Ladder 16"315BFG JAOSRemote& Rack 3Row Rad IPF back& Searchlite HID Overhead Console/CB switchPanel FrARB RrLocker TJMSnorkel 160AAlt Sliders 2nd Tranny Cooler QuickAirII& Tank Rear frame/tank Lift
Re: Group Buy: Trail-Gear Rock Sliders [Re: Angelo] #847757 11/27/07 06:56 PM
Joined: Feb 2002
Posts: 3,548
Angelo Offline OP
Roll Me Over
***
wrote an e mail to trail-gear. A few Monteros on the other board are interested, but might be after christmas, but could be sooner.

I'm sure even if there are others interested with different sizes, I bet they would still give us a decent deal.

Wanted to get a head count of the ones "kinda" interested.


99JAOS2"& OME 2"body 4.90s ARB HS9500i Skids&Ladder 16"315BFG JAOSRemote& Rack 3Row Rad IPF back& Searchlite HID Overhead Console/CB switchPanel FrARB RrLocker TJMSnorkel 160AAlt Sliders 2nd Tranny Cooler QuickAirII& Tank Rear frame/tank Lift
Re: Group Buy: Trail-Gear Rock Sliders [Re: Angelo] #847758 11/29/07 06:31 AM
Joined: Oct 2000
Posts: 669
D
dcg9381 Offline
Rock Warrior
Sliders are priced OK.. any idea on ballpark shipping costs? Those can kill deals these days.


22REturbo.net




1988 4Runner
22RTE core, turbocharged, megasquirted...
Re: Group Buy: Trail-Gear Rock Sliders [Re: dcg9381] #847759 11/29/07 03:57 PM
Joined: Sep 2005
Posts: 970
R
RatLabGuy Offline
Rock Warrior
dcg has a good point on the shipping. To be honest even with what discount you get with the group buy (which can't be too much, gievn that the price of materials is fixed), by the time you add shipping, it might be easier to just get some made locally.
There are tons of guys here in NC that will make you some identical rockers, even in the Charlotte area. only difference is having to pay tax... but if you dig around you can find a local backyard guy who will, er, um, include it in the price...

I'm not knocking the Trail-gear equipment or trying to discourage business from them... just thinking out loud on the practicality of it, since we (on this board) are spread all over the place. More practical "group buy" would be you and 10 guys from Charlotte going in together, so it can all be shipped together at lower cost per unit.


With 200+ Billion electrical parts, the world most complicated machine is inside your own skull.

Question Reality.
-----------------------------
'89 Rnr DLX "SR4.5", 32s w/ 5.29 locked f/r blah blah
Re: Group Buy: Trail-Gear Rock Sliders [Re: RatLabGuy] #847760 11/30/07 03:53 AM
Joined: Oct 2002
Posts: 15,887
kewlynx Offline
Toyota & Classifieds Moderator
*****
That's true; seems the NC ttora is down there. Check with your local wheeling clubs. Good suggestion, really.

Angelo, I can move this down into OT; you know we have a few Carolinians here. LMK.


http://www.walkablecommunities.org/

Democracy is two wolves and a lamb voting on what to have for dinner. Liberty is a well-armed lamb contesting the vote.

**ubi apis- ibi salus**
Re: Group Buy: Trail-Gear Rock Sliders [Re: kewlynx] #847761 11/30/07 05:16 AM
Joined: Aug 2003
Posts: 2,854
G
Greg_Canada Offline
Roll Me Over
Dude, theyre super cheap as they are, you want a group buy? there is a lenght and a half of tube there, and that itself is 70 bucks... plus bending, notching and welding, i'd NEVER be able to sell sliders at that price (those tools are expensive)....
How much cheaper do you think you can get it? i bet if you didnt buy coffee for a week it'd be the same amount. i'm not knocking your group buy, but those are cheap as-is.


89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim
Re: Group Buy: Trail-Gear Rock Sliders [Re: Greg_Canada] #847762 11/30/07 04:58 PM
Joined: Feb 2002
Posts: 3,548
Angelo Offline OP
Roll Me Over
***
yeah, knew they were already cheap enough. It was brought up in the Mitsu section, there were some that expressed interest so figured "what the hell" might as well purchase it the same time and knock a few off, but seeing there wasnt as much interest, I purchased them 2 days ago. Great company! I asked about 2 extra legs (since my Montero is alot heavier than a 84- 88 Yota) and they just threw it in at no charge <img src="/forums/images/graemlins/kewl.gif" alt="" />

I was just thinking out loud when I posted this and let everyone know and put it out on the table and available to those who do "wait" for group buys. But it was at such a good price, I decided to buy.

So while on topic, what is the difference with HREW metal and DOT (I think thats correct) metal? Are they that much stronger/weaker?


99JAOS2"& OME 2"body 4.90s ARB HS9500i Skids&Ladder 16"315BFG JAOSRemote& Rack 3Row Rad IPF back& Searchlite HID Overhead Console/CB switchPanel FrARB RrLocker TJMSnorkel 160AAlt Sliders 2nd Tranny Cooler QuickAirII& Tank Rear frame/tank Lift
Re: Group Buy: Trail-Gear Rock Sliders [Re: Angelo] #847763 11/30/07 08:43 PM
Joined: Jan 2000
Posts: 12,153
4Crawler Offline
Web Wheeler
*****
DOM is Drawn Over Mandrel or forming dies that flatten out the weld seam and the cold working of the tubing makes it stronger:
http://www.davesport.com/cgi-bin/davesport/specs.html

Probably on sliders, not really a big issue. Given a decent wall thickness, a HREW tube should be fine, unless the weld seam is placed to the outside or the bottom where it migh split under a heavy impact.

Re: Group Buy: Trail-Gear Rock Sliders [Re: 4Crawler] #847764 12/06/07 07:04 PM
Joined: Jul 2006
Posts: 230
G
GOI87 Offline
Wheeler
I want the job that their offering. That sounds exactly what I want to do. To bad I'm still in school and don't have 5 years experience. The solidworks is comming along though I'm getting better.

Quote


Trail-Gear is proud to announce that a new position is now available in our Engineering Department. Trail-Gear is seeking a self-motivated Mechanical Engineer with 5 years minimum experience in the off-road industry. Individual should have extensive experience with Solidworks 3D modeling software and Microsoft Office applications. A relocation package is available depending on location. Please send resumes to

hr@trail-gear.com



87 Toyota 4Runner-RV Head, Custom Grind Cam, Doug Thorley Header, Keith Black Pistions, 2 1/4" Magnaflow cat, Dynomax Exhaust
2003 Toyota Matrix XRS-Injen CAI
Re: Group Buy: Trail-Gear Rock Sliders [Re: GOI87] #847765 12/08/07 02:51 AM
Joined: Jul 2000
Posts: 2,191
Dok Offline
Body Damage is Cool
****
Not to hijack, but my dad is having a guy in Charlotte build him a front bumper for his TJ for about 1/2 of what most of them cost. He's an ex Toyota tech that just opened his own shop (CT Offroad) and does alot of custom Yotas. I can get his # if anyone is interested...


'87 4-Runner--DD/wheeler, 4.3 swap coming soon
'89 Supra--E85 powered 2jz NA-T Swap, 533rwhp 497ft-lbs
'89 Festiva, turboed BP swap powered by megasquirt
Page 1 of 3 1 2 3

Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.011s Queries: 16 (0.007s) Memory: 0.6453 MB (Peak: 0.7676 MB) Data Comp: Off Server Time: 2026-11-16 04:20:41 UTC
Valid HTML 5 and Valid CSS