Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
gears #848610 11/24/07 08:13 PM
Joined: Jun 2005
Posts: 66
K
kingfoss Offline OP
Getting the Wheeling Fever
i was wondering if i can run 3.0 gears in the rear and 3.5 gears in the front untill i can afford to regear both axles.

thanks


2000 TJ 5" lift
33" BFG AT
Rear 4-link coming soon
Front hp dana 44 and frod 9" Rear coming sonn
Re: gears [Re: kingfoss] #848611 11/24/07 08:50 PM
Joined: Oct 2003
Posts: 7,768
BigJim Offline
Web Wheeler
YES you can! But you should disconnect the 4X4 because you will ONLY be able to use 2 wheel drive until both gears are the same..
Also the difference betwee 3 and 3.5 is prolly not enough to change.. You might want to rethink which gears you really want in there.
Big JIm <img src="/forums/images/graemlins/pfft.gif" alt="" />


professional bovine relocation specialist
Re: gears [Re: BigJim] #848612 11/24/07 09:17 PM
Joined: Jun 2005
Posts: 66
K
kingfoss Offline OP
Getting the Wheeling Fever
i am going to 4.88 in it when i get the money i need to pu tthe rear axle in so the jeep can be driven again can i run 3.0 and 3.07 in 4 wheel drive?


2000 TJ 5" lift
33" BFG AT
Rear 4-link coming soon
Front hp dana 44 and frod 9" Rear coming sonn
Re: gears [Re: kingfoss] #848613 11/24/07 10:04 PM
Joined: Oct 2003
Posts: 7,768
BigJim Offline
Web Wheeler
Foss I betcha the 3 and 3:07 are the same gears and someone just left off the :07 from the 3... I don;t think it is possible to gear a straight 3:00
Big JIm <img src="/forums/images/graemlins/pfft.gif" alt="" />


professional bovine relocation specialist

Moderated by  4x4Wire 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5989 MB (Peak: 0.6543 MB) Data Comp: Off Server Time: 2026-05-28 15:07:38 UTC
Valid HTML 5 and Valid CSS