OK. I've searched and didn't find what I was looking for, so here goes.

I need to replace the thermostat on my '02 Trooper 3.5L, and it look like the entire intake manifold has to come off to do this. Is this so? If it is, it also looks like the upper plenum will have to be removed for bolt access, or are there really only 4 bolts(studs) holding the IM in place?

Next, I have the Factory Service Manual and it is a complete waste of money, I think I would have been better off with a $15 Haynes manual.

For the Tstat, it says remove the coolant intake pipe, remove the Tstat, replace the Tstat, reinstall the coolant intake pipe.

For intake manifold it has nothing other than a brief description of what an intake manifold is. Nothing for removal or reinstallation.

If somebody has them, I need torque specs for:
- intake manifold to head
- upper plenum to lower manifold
- coolant intake pipe


Thanks,
John