I think Im missing parts

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: I think Im missing parts [Re: boritz] #848724 11/27/07 06:19 AM

Joined: Apr 2000

Posts: 7,268

Ventura County

mlclark

Isuzu Moderator

Note that on some vehicles (mine included) the bolt illustrated as inserting into the end of the drive shaft was replaced by a circlip sitting in a groove around the end of the shaft.

The diagram above is good and it works well, but it is for Toyota. Isuzu has never used a bolt in the stub shaft. It has always been a c-clip.

Michael

Entire Thread
Subject	Posted By	Posted
I think Im missing parts	kneedragger	11/25/07 10:23 PM
Re: I think Im missing parts	boritz	11/26/07 05:41 AM
Re: I think Im missing parts	kneedragger	11/27/07 12:52 AM
Re: I think Im missing parts	boritz	11/27/07 03:48 AM
Re: I think Im missing parts	mlclark	11/27/07 06:19 AM
Re: I think Im missing parts	boritz	11/27/07 08:56 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.497s Queries: 16 (3.494s) Memory: 0.6045 MB (Peak: 0.6375 MB) Data Comp: Off Server Time: 2026-06-16 08:20:00 UTC
Valid HTML 5 and Valid CSS