unusual control arm bushing question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: unusual control arm bushing question [Re: Climber66] #849441 12/01/07 03:20 AM

Joined: Feb 2005

Posts: 1,489

Seattle

Jake97T

Body Damage is Cool

the bushings are sleeved, youll need to reuse the big sleeve after you burn the old bushings off, the bushings are tight, they flex more than rotate when old, but when i put in new bushings (w/ total chaos kit anyway) there was much better movement.

97 FZJ80, Stock, Factory Lockers.

Entire Thread
Subject	Posted By	Posted
unusual control arm bushing question	Climber66	11/29/07 05:11 PM
Re: unusual control arm bushing question	Jeff the marmot	11/30/07 05:54 AM
Re: unusual control arm bushing question	Climber66	11/30/07 08:43 PM
Re: unusual control arm bushing question	Jake97T	12/01/07 03:20 AM
Re: unusual control arm bushing question	Climber66	12/01/07 07:18 PM
Re: unusual control arm bushing question	Jake97T	12/02/07 08:36 PM
Re: unusual control arm bushing question	Climber66	12/03/07 03:14 AM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.526s Queries: 16 (3.524s) Memory: 0.6046 MB (Peak: 0.6375 MB) Data Comp: Off Server Time: 2026-06-12 05:00:30 UTC
Valid HTML 5 and Valid CSS