Plasma Cutters and Air Tools

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Plasma Cutters and Air Tools #849559 11/30/07 03:23 AM

Joined: Sep 2007

Posts: 44

Scottsdale, AZ

SavageSun4x4 Offline

Getting the Wheeling Fever

Plasma like clean oil free air, air tools like a little oil with their gulp of air. For the small home shop this can be a minor challenge but a critical one...Here is how I did it:

Pics/costs/write-up:

http://www.savagesun4x4.com/plasma_cutter_air_tools_on_.html

Don
Scottsdale, AZ
www.savagesun4x4.com

Entire Thread
Subject	Posted By	Posted
Plasma Cutters and Air Tools	SavageSun4x4	11/30/07 03:23 AM
Re: Plasma Cutters and Air Tools	kewlynx	12/06/07 05:34 AM

Moderated by 4x4Wire, PHIL_

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.488s Queries: 15 (3.485s) Memory: 0.5943 MB (Peak: 0.6273 MB) Data Comp: Off Server Time: 2026-06-24 18:41:04 UTC
Valid HTML 5 and Valid CSS