Head Re-torque Question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Head Re-torque Question #849770 12/01/07 02:51 PM

Joined: Jan 2004

Posts: 383

Southern California

Stevie

Mudrunner

It's been about 500 miles since the new head gasket installation on the 20R, and want to know if the re-torque of the head should be done hot or cold. Thanks.

'80 4X4 Longbed

Entire Thread
Subject	Posted By	Posted
Head Re-torque Question	Stevie	12/01/07 02:51 PM
Re: Head Re-torque Question	Vanishing_Point	12/03/07 06:39 PM
Re: Head Re-torque Question	longhaul	12/04/07 03:11 AM
Re: Head Re-torque Question	kewlynx	12/04/07 03:26 AM
Re: Head Re-torque Question	Stevie	12/04/07 03:31 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.436s Queries: 15 (3.434s) Memory: 0.6001 MB (Peak: 0.6330 MB) Data Comp: Off Server Time: 2026-06-02 12:13:10 UTC
Valid HTML 5 and Valid CSS