Another conversion question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Another conversion question [Re: TX76513] #849910 12/03/07 05:57 PM

Joined: Dec 2007

Posts: 66

Olympia, WA

overland47 Offline

Getting the Wheeling Fever

My friend at the machine shop has sourced everything and it is all availible two to three days out, except the pistons. I have been searching for new pistons for years now, and keep coming up empty handed.

It was my understanding that the foriegn versions of the C223 used different pistons. Is that correct??

Will do some more searching.

Thanks

Tough Guy, Inc.

Entire Thread
Subject	Posted By	Posted
Another conversion question	overland47	12/02/07 05:29 AM
Re: Another conversion question	TX76513	12/03/07 04:08 PM
Re: Another conversion question	overland47	12/03/07 05:57 PM
Re: Another conversion question	TX76513	12/04/07 04:14 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.468s Queries: 16 (3.466s) Memory: 0.5993 MB (Peak: 0.6323 MB) Data Comp: Off Server Time: 2026-06-03 02:34:40 UTC
Valid HTML 5 and Valid CSS