22re Intake removal '89

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

22re Intake removal '89 #850073 12/03/07 08:27 PM

Joined: May 2002

Posts: 126

Memphis, TN

Bonzai

Wheeler

How do I get the intake out of the truck?

I have the wiring harness running between the runners and the outer flange, where the plenum bolts to the intake. Its loose from the block, but the harness is keeping me from getting it out of the truck.

Any tips for this situation? I would appreciate some advice.

Thanks,
Taylor

89 Toyota P/U, 22re, SAS, 4" All-Pro Fronts, Chevy rears, 33x12.50's...

Entire Thread
Subject	Posted By	Posted
22re Intake removal '89	Bonzai	12/03/07 08:27 PM
Re: 22re Intake removal '89	kewlynx	12/04/07 03:28 AM
Re: 22re Intake removal '89	lethe	12/04/07 05:26 AM
Re: 22re Intake removal '89	Bonzai	12/04/07 06:03 AM
Re: 22re Intake removal '89	yota4runna	12/05/07 04:15 AM
Re: 22re Intake removal '89	zoomschwortz	12/07/07 04:32 PM
Re: 22re Intake removal '89	RatLabGuy	12/08/07 04:00 AM
Re: 22re Intake removal '89	zoomschwortz	12/08/07 05:44 PM
Re: 22re Intake removal '89	Bonzai	12/17/07 03:29 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.402s Queries: 15 (3.400s) Memory: 0.6081 MB (Peak: 0.6411 MB) Data Comp: Off Server Time: 2026-06-01 00:58:10 UTC
Valid HTML 5 and Valid CSS