Gen 3 cooling issues

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Gen 3 cooling issues #850121 12/04/07 01:54 AM

Joined: Oct 2006

Posts: 33

Arizona

Seif1

Getting the Wheeling Fever

Guys, I blew a fitting (plastic fitting for the rear air) this weekend on the Monty. I have since replaced and am unsure about the purging process for the Montero...

The thermostat is not opening...

Help?

I know of the two bleed screws, is there any specific order?

Thanks,
Mark

2003 Jeep Grand Cherokee
34K
6" Long arm lift
Rock Sliders
ARB Bumper(s)
Mile Marker winch
285/75/16 Dueler AT's
ARB air locker (front)
Custom Roof Rack

Entire Thread
Subject	Posted By	Posted
Gen 3 cooling issues	Seif1	12/04/07 01:54 AM
Re: Gen 3 cooling issues	icysyrup	12/06/07 03:21 AM
Re: Gen 3 cooling issues	Seif1	12/08/07 03:35 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.467s Queries: 15 (3.464s) Memory: 0.5966 MB (Peak: 0.6296 MB) Data Comp: Off Server Time: 2026-06-25 11:06:27 UTC
Valid HTML 5 and Valid CSS