|
|
|
|
 Gen 3 cooling issues
#850121
12/04/07 01:54 AM
|
Joined: Oct 2006
Posts: 33
OP
Getting the Wheeling Fever
|
Guys, I blew a fitting (plastic fitting for the rear air) this weekend on the Monty. I have since replaced and am unsure about the purging process for the Montero...
The thermostat is not opening...
Help?
I know of the two bleed screws, is there any specific order?
Thanks,
Mark
2003 Jeep Grand Cherokee
34K
6" Long arm lift
Rock Sliders
ARB Bumper(s)
Mile Marker winch
285/75/16 Dueler AT's
ARB air locker (front)
Custom Roof Rack
|
|
|
Re: Gen 3 cooling issues
[Re: Seif1]
#850122
12/06/07 03:21 AM
|
Joined: Aug 2005
Posts: 826
Rock Warrior
|
I drained mine and refilled it completely without any "airlock" like you are having...i just emptied rad and then refilled with it running and burping air out.....
03 Montero XLS, OME 2"suspension lift,Full skid plates, Extended Diff/transfer breathers. 34 LTB's, Winch w/syn rope, Locked front/rear.
|
|
|
Re: Gen 3 cooling issues
[Re: icysyrup]
#850123
12/08/07 03:35 AM
|
Joined: Oct 2006
Posts: 33
OP
Getting the Wheeling Fever
|
Yeah, I got 'er running...thanks for the info.
Mark
2003 Jeep Grand Cherokee
34K
6" Long arm lift
Rock Sliders
ARB Bumper(s)
Mile Marker winch
285/75/16 Dueler AT's
ARB air locker (front)
Custom Roof Rack
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.007s Queries: 15 (0.004s) Memory: 0.5899 MB (Peak: 0.6430 MB) Data Comp: Off Server Time: 2026-06-23 18:21:01 UTCValid HTML 5 and Valid CSS 