|
|
 Re: sold the first one .. so this ones mine ... Trekker Build
[Re: CJM]
#851267
11/06/08 05:28 PM
|
Joined: Feb 2007
Posts: 21
Need a Spot
|
My frame has a rust hole in the EXACT same place above the front leaf spring mount on the passenger side rear. Anyone else have the same issue? Is there a design flaw that causes this to happen? By the way, great job you're doing!
85 4x4,22r Carb, BFG 33x12.5/15x10 Rocket Startrack rims, 2" Body Lift, Rancho Springs(3"f/2"r), stabilizer & adj tork rod, Skyjacker adj drag link ,Bilstein shox, Line-x'd where it counts, KC HiLites, grill guard, roll bar, dual quad rear bumper.
|
|
|
Re: sold the first one .. so this ones mine ... Trekker Build
[Re: masheen]
#851268
11/09/08 01:55 AM
|
Joined: Sep 2003
Posts: 1,856
OP
Body Damage is Cool
|
My frame has a rust hole in the EXACT same place above the front leaf spring mount on the passenger side rear. Anyone else have the same issue? Is there a design flaw that causes this to happen? By the way, great job you're doing! Thanks and pretty common on that area of the frame .
|
|
|
Re: sold the first one .. so this ones mine ... Trekker Build
[Re: CJM]
#851269
11/09/08 01:56 AM
|
Joined: Sep 2003
Posts: 1,856
OP
Body Damage is Cool
|
so now the outer is done on the drivers side .. time for the inner  got the upper support welded and started on the lower and seat belt support ![[Linked Image]](http://i76.photobucket.com/albums/j2/bj_bumperboy/MY%20Trekker/HPIM1151.jpg) ![[Linked Image]](http://i76.photobucket.com/albums/j2/bj_bumperboy/MY%20Trekker/HPIM1152.jpg) and finally the inner rocker skin ![[Linked Image]](http://i76.photobucket.com/albums/j2/bj_bumperboy/MY%20Trekker/HPIM1154.jpg) also got all the welds "dressed" ![[Linked Image]](http://i76.photobucket.com/albums/j2/bj_bumperboy/MY%20Trekker/HPIM1155.jpg) and also got a little new piece today ... ![[Linked Image]](http://i76.photobucket.com/albums/j2/bj_bumperboy/MY%20Trekker/HPIM1156.jpg) just need an "extension" on the stock pipe , and I can install the mufler .
|
|
|
Re: sold the first one .. so this ones mine ... Trekker Build
[Re: CJM]
#851270
11/09/08 06:00 PM
|
Joined: Aug 2003
Posts: 2,854
Roll Me Over
|
|
89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim
|
|
|
Re: sold the first one .. so this ones mine ... Trekker Build
[Re: Greg_Canada]
#851271
11/09/08 07:55 PM
|
Joined: Sep 2003
Posts: 1,856
OP
Body Damage is Cool
|
|
|
|
|
Re: sold the first one .. so this ones mine ... Trekker Build
[Re: CJM]
#851272
11/09/08 11:48 PM
|
Joined: Sep 2005
Posts: 970
Rock Warrior
|
Some people don't like the tone, especially on a 4cyl. However, w/ your drivetrain plans i think it will sound nice.
With 200+ Billion electrical parts, the world most complicated machine is inside your own skull.
Question Reality.
-----------------------------
'89 Rnr DLX "SR4.5", 32s w/ 5.29 locked f/r blah blah
|
|
|
Re: sold the first one .. so this ones mine ... Trekker Build
[Re: RatLabGuy]
#851273
11/10/08 02:17 AM
|
Joined: Sep 2003
Posts: 1,856
OP
Body Damage is Cool
|
yeah ,no 4Cyl in this piece , supercharged 3.4L V6 .. and I think it'll sound great .. a little louder then most would like , but.. I'm and "old school" and dont mind some "tone" ............. <img src="/forums/images/graemlins/mrt.gif" alt="" /> foo!
Last edited by CJM; 11/10/08 02:20 AM.
|
|
|
Re: sold the first one .. so this ones mine ... Trekker Build
[Re: CJM]
#851274
11/10/08 07:01 PM
|
Joined: Aug 2003
Posts: 2,854
Roll Me Over
|
It's also the worst flowing aftermaket muffler out there... creates alot of unwanted backpressure...
they are tough as nails tho....
89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim
|
|
|
Re: sold the first one .. so this ones mine ... Trekker Build
[Re: Greg_Canada]
#851275
11/11/08 03:10 AM
|
Joined: Sep 2003
Posts: 1,856
OP
Body Damage is Cool
|
It's also the worst flowing aftermaket muffler out there... creates alot of unwanted backpressure...
they are tough as nails tho.... stats ? .. as far as I know , they are a free flowing /minimal back pressure muffler .. it's what I have read anyway . only down issues I have read and heard on wave files .. is there loud .. but' i'm likin' the noise ..
|
|
|
Re: sold the first one .. so this ones mine ... Trekker Build
[Re: CJM]
#851276
11/11/08 02:32 PM
|
Joined: Aug 2003
Posts: 2,854
Roll Me Over
|
It's also the worst flowing aftermaket muffler out there... creates alot of unwanted backpressure...
they are tough as nails tho.... stats ? .. as far as I know , they are a free flowing /minimal back pressure muffler .. it's what I have read anyway . only down issues I have read and heard on wave files .. is there loud .. but' i'm likin' the noise .. Here's a chart for you. http://www.dynomax.com/products/ultrafloweld.htmli believe it because the dynomax is a straight through design and the flowmaster has lots of baffles to create the sound.
89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim
|
|
|
|
