The fans I ordered from summitracing.com. They are made by Be Cool. They were about 75 dollars a piece and 9" in diameter. I used some of that universal angle you can buy at any hardware store with all the holes pre drilled in it. I cut them to length to run horizontally and bolt to the same bolts holding the radiator to the core support. The fans had to be rotated a bit and are only held by two bolts, one in each "corner", but they are plenty sturdy. They are nice and close to the radiator too.

Yesterday while it was idling, once it warmed up the fans would come on about every two minutes for 45 seconds or so. You can just watch the temp gauge go down when the fans come on. I am very happy with the way they work, plus it opens up a lot of room in the engine compartment with the mechanical on removed.

I can get some better pics if you want them.

I have a favor to ask of you to, but I'll send you an email this evening.

Thanks.