SR body mount bolt removal

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: SR body mount bolt removal [Re: ryany] #853420 12/16/07 10:46 PM

Joined: Sep 2006

Posts: 53

sac town CA

silver94sr Offline

Getting the Wheeling Fever

if memory serves me correctly. you have to loosen the bolts and then what I did, was get a really long screw driver or something long and skinny and a hammer and hammer the bolt up until the tab on the bolt folds back and then can be removed from the hole. good luck that is the fun part the rest is easy.

1994 Montero SR 101,000 JDM 3.5
2" BL, 2.5" Valley Springs Rear Coils
BFG's 33x12.5 MT

Entire Thread
Subject	Posted By	Posted
SR body mount bolt removal	ryany	12/16/07 10:28 PM
Re: SR body mount bolt removal	silver94sr	12/16/07 10:46 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.499s Queries: 16 (3.497s) Memory: 0.5945 MB (Peak: 0.6275 MB) Data Comp: Off Server Time: 2026-06-11 20:06:49 UTC
Valid HTML 5 and Valid CSS