Quote
And hit them with Blaster the night before so they have a good soak before trying to take off. At least, that's what you'd want to do up here is the rust belt... <img src="/forums/images/graemlins/barf.gif" alt="" />


I am talking about the screws that hold the face of the hub on. I dont like them. Yes it would be a good idea to hit the bigger hub bolts with PB before taking them off. Make sure you use the correct size bit. I cant rmemeber what size, 8mm I think? Make sure the bit is seated all the way and apply torque slowly and evenly. It is a pretty easy job.

I just want to tell you both good luck, and we're all counting on you.