egr tube

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: egr tube [Re: kevbo] #855087 12/29/07 05:55 AM

Joined: Jan 2004

Posts: 70

theduker

Getting the Wheeling Fever

I had to replace mine when I couldn't get it off to install a new header. The end on the exhaust side I believe was flared and the bolt into the manifold just screws on. I think the EGR side is the same. PITA to get it around the block and mounted correctly. I ended up not using the bracket that bolt to the transmission.

Entire Thread
Subject	Posted By	Posted
egr tube	kevbo	12/27/07 05:00 AM
Re: egr tube	strawmyers	12/27/07 12:09 PM
Re: egr tube	theduker	12/29/07 05:55 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.410s Queries: 16 (3.408s) Memory: 0.5961 MB (Peak: 0.6291 MB) Data Comp: Off Server Time: 2026-05-31 06:22:37 UTC
Valid HTML 5 and Valid CSS