probably, or one similar, like the D44, but then you have to cut off the back end of it and slip it over the axle tube and crank on it with an oil filter wrench or weld a pipe to it or something.

to be honest, i always thought rear non c-clip shafts had PRESSED-ON bearings with PRESSED-ON collars, not nuts.

Last edited by Dave Scott; 12/28/07 09:18 PM.
95 Sportage w/welded and 5.89 geared dana 44's on 38.5" TSL's.- SADLY SOLD
CURRENTLY - 2000 sportage, 5.38 gears, welded diffs, 35" tires, 5.5" lift

http://www.cardomain.com/ride/341410