2nd flex plate failure

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 2nd flex plate failure [Re: jim_carlson] #855415 12/28/07 12:23 PM

Joined: Apr 2003

Posts: 1,994

Under my wifes RODEO in EastTN

Bansil

Body Damage is Cool

if your starter is not lined up/shim correctly it could be pushing the plate and breaking it,also if there isn't enough shims to put it far enough away,it could be binding the flex plate as it turns(because flex plates aren't 100% round) just a few ideas.

98 Rodeo(hers)
00 Rodeo(his)

Lisa's Rodeo

Entire Thread
Subject	Posted By	Posted
2nd flex plate failure	jim_carlson	12/28/07 01:50 AM
Re: 2nd flex plate failure	lttlbddy	12/28/07 05:49 AM
Re: 2nd flex plate failure	Bansil	12/28/07 12:23 PM
Re: 2nd flex plate failure	jim_carlson	12/28/07 05:41 PM
Re: 2nd flex plate failure	Bansil	12/28/07 06:35 PM
Re: 2nd flex plate failure	jim_carlson	12/29/07 07:47 PM
Re: 2nd flex plate failure	reran	12/29/07 08:21 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.789s Queries: 16 (3.786s) Memory: 0.6040 MB (Peak: 0.6370 MB) Data Comp: Off Server Time: 2026-11-02 02:43:43 UTC
Valid HTML 5 and Valid CSS