Oil Filter Base Bracket Replacement

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Oil Filter Base Bracket Replacement [Re: BajaxjH4l] #855685 12/28/07 11:04 PM

Joined: Aug 2003

Posts: 645

Oklahoma City, OK

Airdale73013 Offline

Rock Warrior

I am preparing to replace my o-rings on the oil filter adapter. The part number for the Mopar kit is 1-04720363 and it cost $6.01 at my dealer. You will need a 14mm hex (allen) wrench which will fit inside the screw at the center of the adapter.

2009 Sorento LX, 4x4, V6, Auto, Red

Entire Thread
Subject	Posted By	Posted
Oil Filter Base Bracket Replacement	BajaxjH4l	12/28/07 09:47 PM
Re: Oil Filter Base Bracket Replacement	Airdale73013	12/28/07 11:04 PM
Re: Oil Filter Base Bracket Replacement	BajaxjH4l	12/29/07 05:29 PM
Re: Oil Filter Base Bracket Replacement	BajaxjH4l	01/08/08 05:03 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.452s Queries: 16 (3.450s) Memory: 0.5983 MB (Peak: 0.6313 MB) Data Comp: Off Server Time: 2026-06-03 19:34:31 UTC
Valid HTML 5 and Valid CSS