Re: Solid axle thoughts again....

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Solid axle thoughts again.... [Re: 4xGeek] #855812 12/29/07 03:57 AM

Joined: Feb 2005

Posts: 1,489

Seattle

Jake97T

Body Damage is Cool

looked into diamond axles, not sure if that would be cheaper for a custom setup...

my primary concern when i was figuring which i would do (LT vs. SAS) was shackle location, would shackles towards the back work without having them under the frame?

97 FZJ80, Stock, Factory Lockers.

Entire Thread
Subject	Posted By	Posted
Re: Solid axle thoughts again....	4xGeek	12/29/07 02:37 AM
Re: Solid axle thoughts again....	Jake97T	12/29/07 03:57 AM
Re: Solid axle thoughts again....	adam	01/01/08 03:41 AM
Re: Solid axle thoughts again....	4xGeek	01/01/08 10:00 PM
Re: Solid axle thoughts again....	adam	01/03/08 05:21 AM
Re: Solid axle thoughts again....	surlynkid	01/02/08 04:07 PM
Re: Solid axle thoughts again....	ErikB	12/31/07 04:29 PM
Re: Solid axle thoughts again....	Creeper	12/31/07 09:21 PM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.827s Queries: 16 (3.825s) Memory: 0.6075 MB (Peak: 0.6405 MB) Data Comp: Off Server Time: 2026-06-10 19:16:06 UTC
Valid HTML 5 and Valid CSS