2.3 / 2.6 Flywheel bolt torque value?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

2.3 / 2.6 Flywheel bolt torque value? #855871 12/29/07 01:52 PM

Joined: Dec 2000

Posts: 53

Detroit area, MI

aribert

Getting the Wheeling Fever

My Haynes manual list a flywheel bolt torque value of 40 ft-lbs for the 4 cyl engine. I am questioning the value - it seems low. I was expecting something in the 50 to 70 ft-lb range. If you have access to another source for torque values please check and post. Thanks

Entire Thread
Subject	Posted By	Posted
2.3 / 2.6 Flywheel bolt torque value?	aribert	12/29/07 01:52 PM
Re: 2.3 / 2.6 Flywheel bolt torque value?	lttlbddy	12/30/07 02:58 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.513s Queries: 15 (3.511s) Memory: 0.5926 MB (Peak: 0.6256 MB) Data Comp: Off Server Time: 2026-06-19 06:29:41 UTC
Valid HTML 5 and Valid CSS