3.4 won't start after 1980 body swap

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3.4 won't start after 1980 body swap [Re: Winch] #857060 01/03/08 06:21 AM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

Trace the wire from the relay to the starter. You have 12 volts at the relay and none at the starter. Find some point in between and test the voltage there. If you have voltage there, check between there and the starter, otherwise between there and the relay. Maybe a connector pin is loose or a wire broken some place.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
3.4 won't start after 1980 body swap	Winch	01/03/08 06:18 AM
Re: 3.4 won't start after 1980 body swap	kewlynx	01/03/08 06:20 AM
Re: 3.4 won't start after 1980 body swap	4Crawler	01/03/08 06:21 AM
Re: 3.4 won't start after 1980 body swap	Red_Chili	01/03/08 07:15 PM
Re: 3.4 won't start after 1980 body swap	Winch	01/04/08 04:52 AM
Re: 3.4 won't start after 1980 body swap	kewlynx	01/04/08 05:16 AM
Re: 3.4 won't start after 1980 body swap	Winch	01/04/08 06:05 PM
Re: 3.4 won't start after 1980 body swap	Staceman	01/04/08 09:59 PM
Re: 3.4 won't start after 1980 body swap	Greg_Canada	01/05/08 03:36 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: