99 Taco Head Gasket repair

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 99 Taco Head Gasket repair [Re: ragtoy99] #857904 01/06/08 07:02 PM

Joined: Aug 2003

Posts: 712

Waskom, Texas

john_luttrell Offline

Rock Warrior

I have done lots of them; not too bad of a job, if you have the tools and experiance. You can knock the job out in around 6 hours or so if you have everything prepped and all the parts ready to go.

Take your time and be sure to use a torque wrench and the proper torque sequence. Also triple check the timing marks when you line it all back up.

John Luttrell
2001 4x4 short cab, 3 inch lift with 33 inch mudders and Powertrax no-slip in the rear

1991 Jeep YJ, 4 inch suspension lift on 33" BFG's

Entire Thread
Subject	Posted By	Posted
99 Taco Head Gasket repair	ragtoy99	01/06/08 02:42 AM
Re: 99 Taco Head Gasket repair	john_luttrell	01/06/08 07:02 PM

Moderated by 4x4Wire, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.476s Queries: 16 (3.474s) Memory: 0.5943 MB (Peak: 0.6273 MB) Data Comp: Off Server Time: 2026-06-05 08:09:23 UTC
Valid HTML 5 and Valid CSS