Need exploded view of clutch pedal mechanism

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Need exploded view of clutch pedal mechanism #858949 01/10/08 04:11 AM

Joined: Dec 2007

Posts: 29

Orange Park, Fl

damitboy

Getting the Wheeling Fever

Does anyone have a link to these diagrams like the dealer has. I bought a plastic dash part and the dealer printed a great exploded view of my dash. I'm looking for one for my clutch pedal mechanism. I have a noise when I get up to operating temp that I have a hunch is some kind of rubber gromet or bushing. It even makes the noise when I shut the engine down and push the pedal in and out. Thanks.

---------------------------
94 XJ 2 Door/2.5/5 SPD/4 WD

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 0.129s Queries: 14 (0.003s) Memory: 0.5807 MB (Peak: 0.6206 MB) Data Comp: Off Server Time: 2026-06-17 19:38:04 UTC
Valid HTML 5 and Valid CSS