Re-torque after rebuild

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Re-torque after rebuild [Re: Bogo] #859042 01/11/08 09:34 PM

Joined: Jan 2004

Posts: 383

Southern California

Stevie

Mudrunner

Ya know, I didn't check the intake manifold. Maybe because of inaccessabilty, but mostly because I saw no leaks of antifreeze.

'80 4X4 Longbed

Entire Thread
Subject	Posted By	Posted
Re-torque after rebuild	Stevie	01/10/08 06:10 PM
Re: Re-torque after rebuild	missouriman	01/10/08 08:57 PM
Re: Re-torque after rebuild	Bolosh	01/10/08 10:20 PM
Re: Re-torque after rebuild	dcg9381	01/10/08 11:49 PM
Re: Re-torque after rebuild	outdoorfan	01/11/08 04:38 AM
Re: Re-torque after rebuild	kewlynx	01/11/08 04:41 AM
Re: Re-torque after rebuild	Vanishing_Point	01/11/08 05:28 AM
Re: Re-torque after rebuild	engnbldr	01/11/08 05:34 PM
Re: Re-torque after rebuild	yota4runna	01/11/08 06:10 PM
Re: Re-torque after rebuild	Bogo	01/11/08 07:01 PM
Re: Re-torque after rebuild	Stevie	01/11/08 09:34 PM
Re: Re-torque after rebuild	Davepet	01/12/08 08:56 AM
Re: Re-torque after rebuild	engnbldr	01/12/08 05:16 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.907s Queries: 16 (3.444s) Memory: 0.6198 MB (Peak: 0.6527 MB) Data Comp: Off Server Time: 2026-06-03 09:45:51 UTC
Valid HTML 5 and Valid CSS