Just purchased this 91 that needs tranny work. First and foremost it goes in reverse just fine, Forward slips bad but sometimes engages.

Heres the specs on the rig:
91 Jeep Wrangler
6Cyl 4.0L High Output engine
Unsure what the tranny is just yet

When I picked it up, we added some tranny fluid (most of which poured straight to the ground) the little that must have got in did give us a little forward, but not enough to get it up the trailer.

So now heres my thoughts:

1. Filter and pan gasket need changed. We did this once with a buick with the same issue and it fixed it.

2. The filler tube is cracked OR not fully seated in the tranny? possibility?

3. Tranny is burned out, need a new one.

I had a lead on a tranny, but after doing a little digging think that it will not fit my wrangler. It comes from a 91 Cherokee.

Any suggestions?

Thanks,

Ken