amc head

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

amc head #860019 01/15/08 04:39 PM

Joined: Nov 2005

Posts: 43

Omaha, NE

binx

Getting the Wheeling Fever

I just received my new amc head and i had assumed that it would be complete minus the cam but it was also missing the rockers. Is there any reason to worry about using the old rockers(they seemed to be functioning, but i haven't pulled it apart yet), or should i just order the amc rockers. Also, i am assuming the amc rockers are the same thing as the stock part, right.
thanks

2000 amigo ironman, 4" suspension 1" body lift on 33's with 4.77 gears, tera lows, and no-slip locker.

Entire Thread
Subject	Posted By	Posted
amc head	binx	01/15/08 04:39 PM
Re: amc head	Richard Saylor	01/16/08 03:27 AM
Re: amc head	Trooper-san	01/16/08 08:45 AM
Re: amc head	binx	01/16/08 07:12 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.579s Queries: 15 (3.477s) Memory: 0.5987 MB (Peak: 0.6316 MB) Data Comp: Off Server Time: 2026-07-13 06:06:55 UTC
Valid HTML 5 and Valid CSS