Distributor

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Distributor #861488 01/20/08 07:46 PM

Joined: Oct 2003

Posts: 183

DFW

drainsbe

Wheeler

My distributor bearings/bushings sure are noisy. Before it siezes up has anyone ever rebuilt theirs? Any part #s that you can share? I would rather rebuild if possible rather than getting some other problem from a PNP or eBay. <img src="/forums/images/graemlins/scared.gif" alt="" /> Dealership is $$$$

Thanx in advance!

Dave
86 4Runner, 22R-EB

Entire Thread
Subject	Posted By	Posted
Distributor	drainsbe	01/20/08 07:46 PM
Re: Distributor	Stevie	01/20/08 09:40 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.544s Queries: 15 (3.542s) Memory: 0.5923 MB (Peak: 0.6253 MB) Data Comp: Off Server Time: 2026-07-15 10:43:24 UTC
Valid HTML 5 and Valid CSS