Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Distributor #861488 01/20/08 07:46 PM
Joined: Oct 2003
Posts: 183
drainsbe Offline OP
Wheeler
My distributor bearings/bushings sure are noisy. Before it siezes up has anyone ever rebuilt theirs? Any part #s that you can share? I would rather rebuild if possible rather than getting some other problem from a PNP or eBay. <img src="/forums/images/graemlins/scared.gif" alt="" /> Dealership is $$$$

Thanx in advance!


Dave
86 4Runner, 22R-EB
Re: Distributor [Re: drainsbe] #861489 01/20/08 09:40 PM
Joined: Jan 2004
Posts: 383
Stevie Offline
Mudrunner
Yes you can rebuild them. Most repair manuals have a breakdown diagram. A good needlenose pliers too, IIRC.


'80 4X4 Longbed

Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.658s Queries: 15 (0.009s) Memory: 0.5861 MB (Peak: 0.6340 MB) Data Comp: Off Server Time: 2026-07-15 08:36:21 UTC
Valid HTML 5 and Valid CSS