rear case swap-tcase slip to fixed yoke

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: rear case swap-tcase slip to fixed yoke [Re: Bansil] #862000 01/22/08 05:39 PM

Joined: Sep 2000

Posts: 4,277

Winston-Salem, NC, USA

RobG

Roll Me Over

Quote

I assume the shift rails would be different.

does it matter for what you're doing? granted when I did my conversion over, I installed Tera's at the same time so I was using their hi-lo shift rail, but besides that, I didn't need any of the rails from the donor case. just the cover w/ its output cluster, hi-lo gear and clutch, and 4wd gear (again I was using Tera's).

-Rob

Entire Thread
Subject	Posted By	Posted
rear case swap-tcase slip to fixed yoke	Bansil	01/22/08 12:50 PM
Re: rear case swap-tcase slip to fixed yoke	RobG	01/22/08 05:39 PM
Re: rear case swap-tcase slip to fixed yoke	Bansil	01/22/08 06:42 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.522s Queries: 16 (3.520s) Memory: 0.5969 MB (Peak: 0.6299 MB) Data Comp: Off Server Time: 2026-06-20 05:30:33 UTC
Valid HTML 5 and Valid CSS