Removeable Doors in a Gen I ?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Removeable Doors in a Gen I ? [Re: MarkG] #862011 01/22/08 11:53 PM

Joined: Dec 2000

Posts: 6,896

Ponchatoula, LA

sparkem

Trail Leader

I did it on my Raider. It was non-power windows and locks, so no wires to mess with. You can pull the doors or put them on in less than 5 min. I just cut the original pin and replaced with pins I found at Home Depot or Lowes. Be careful you dont drop a door, they are not too heavy, I bent the corner on one of mine.

I just want to tell you both good luck, and we're all counting on you.

Entire Thread
Subject	Posted By	Posted
Removeable Doors in a Gen I ?	TripleJackInGA	01/22/08 02:38 PM
Re: Removeable Doors in a Gen I ?	OldColt	01/22/08 03:18 PM
Re: Removeable Doors in a Gen I ?	MarkG	01/22/08 03:43 PM
Re: Removeable Doors in a Gen I ?	sparkem	01/22/08 11:53 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.483s Queries: 16 (3.481s) Memory: 0.5996 MB (Peak: 0.6326 MB) Data Comp: Off Server Time: 2026-06-13 14:35:44 UTC
Valid HTML 5 and Valid CSS