I almost lost my sport, I could go postal on the bank right now.

GCS20 , GCS25 , G138MB , GP138MB are the clark mitsu 2.6 powered forklifts

pretty much look under the hood of one of your forklifts you'll get the idea.

Well, I finally have started trying to get some organization going for the final push on my Raider. I am nearly complete on fishing all my tools out of various tool boxes and putting them all together again, cleaned off the work bench and cleaned out the vehicle itself. I've still got some other cleaning and things to do before I think I'll try mounting the electric fuel pump. I still haven't even finished removing the stock exhaust, either. I guess my goal, short-term, is to get the easy stuff out of the way so I don't waste too much more of anyone's time. Just wanted to let you know that I'm sort of back on it again.

John B.

Additionally, I found the extra bouncy seat frame that BottomFeeder gave me a long time ago. It needs a little welding TLC, but if Toasty, LordTrunks or Pa_Jero wants it, you guys get first dibs.

Later today I should be posting up in the "For Sale" section for Jose-B from next door. He wants me to list his stock steel wheels with near-perfect BFG AT/KO's in 33x12.5/15 (set of 4). Yes, you saw that right, 12.5's on stock 6" wheels. He's also selling his second Raider, an '87. It runs, but would need lots of stuff. I'll let you all know when that's done.

John B.

if it's front knob i'll take it, actually i'm the only welder so i'll take it and fix it and give it away if its side knob

The knob is on the front, points to the driver's side.

Just happened to look at the "for sale" section and spotted all parts for the V-6 brake conversion for $50+shipping. Done! Maybe that will provide the impetus to get those manual hubs on...finally.

John B.

well went and checked dropped off some parts today for john Hughes v6 2dr looks good gen 2 locking rear end is in he is gonna have to get a custom driveshaft made up for it as his takes the BIG U-joint and the flange i have mesa drive shaft turned down they say it doesnt have enough extra metal but i don't get why they just don't add some I think it maybe tom woods time for john, either way he will be up and running this month 33's Front locker goes in next month.

On a bad note: washers eat socks but what eats wiring diagrams!!!??? I can't find the ones i printed out for pa_jeros truck. <img src="/forums/images/graemlins/angry.gif" alt="" />

Thats awesome johnnyb <img src="/forums/images/graemlins/kewl.gif" alt="" />, looks to be a little bit more life for the AZ crew. Hopfully it will keep up, I have a little bit more motivation my self, well, other than adam calling me everyday or a text message every 2 or 3 hours "work on your blue truck yet?". I bought some new/used stuff for the blue beast, I finally got a new gas tank for the thing, so now I can hold all 15 gallons. got some aisan hubs for the thing and also a new bouncy, just a couple days late johnny, its cool I'm sure adam will get some use out of it. And last but not least, some GOOD TIRES finally for only 100 bucks and there 35's, BFG A/T. I think they will be the best set of tires that truck has seen in a long time. Thanks adam. I'm really hoping I will be able to wheel for the AZ reunion trip, I'm pretty excited for it.

i hope you enjoy them, run em' till they're bald!

I plan to, don't worry you know I will <img src="/forums/images/graemlins/wink.gif" alt="" />