Front suspension work

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Front suspension work [Re: carlover626] #863667 01/24/08 08:08 PM

Joined: Aug 2004

Posts: 1,997

Springfield,VA

Chris_J

Body Damage is Cool

I did my own. Much less then that. I did have to buy a portable press to do my upper and lower balljoints. And wheel bearings are a pain. But no where near 500$

Entire Thread
Subject	Posted By	Posted
Front suspension work	carlover626	01/24/08 06:58 PM
Re: Front suspension work	Chris_J	01/24/08 08:08 PM
Re: Front suspension work	carlover626	01/24/08 08:40 PM
Re: Front suspension work	fasteddy	01/24/08 10:06 PM
Re: Front suspension work	IncorpoRatedX	01/24/08 10:50 PM
Re: Front suspension work	carlover626	01/24/08 11:23 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.859s Queries: 16 (3.857s) Memory: 0.6018 MB (Peak: 0.6348 MB) Data Comp: Off Server Time: 2026-06-08 10:06:32 UTC
Valid HTML 5 and Valid CSS