---

Register Log In 4x4Wire TrailTalk Forums Early Toyota Trucks Passenger side door problems Forums User List Calendar Active Threads Search Forum Help

Previous Thread Next Thread Print Thread Rate Thread Passenger side door problems #863720 01/25/08 12:36 AM Joined: Jul 2006 Posts: 139 VanillaTHUNDA OP Wheeler 87 4runner SR5 It would seem that my passenger side door won't open from the inside using the regular handle. However, it will open when using the rear handle. I pulled off the door panel and it looks like the rod simply doesn't pull enough. Is there an adjustment? Re: Passenger side door problems [Re: VanillaTHUNDA] #863721 01/25/08 02:46 AM Joined: Oct 2003 Posts: 197 SanDiego,Ca. Cholltero Wheeler The rod that attaches to the front handle may have rattled off---------or it is just a little too long to unlatch things in which case you just bend it a little to shorten it up 85' 4x4 e-cab flatbed 22r carb ((SOLD)) 86' 4runner, 22re , "60 buck truck" 95' 4runner, 22re,5sd, last of the good ones 02' Tacoma prerunner, 2.7L, 5spd., 4x4 Re: Passenger side door problems [Re: VanillaTHUNDA] #863722 01/25/08 05:38 AM Joined: Dec 2000 Posts: 882 Black Hills of South Dakota M missouriman Rock Warrior look, there is a sort of Z in the rod.. you bend it. or you lost the inside of one of those fold over snap down rod clips. Re: Passenger side door problems [Re: missouriman] #863723 01/25/08 03:52 PM Joined: Aug 2003 Posts: 2,854 Toronto, Canada G Greg_Canada Roll Me Over Mine does the same thing some times, if you push on the door panel it works fine. The main problem is, the rod is flexing and not pulling the latch. Take the panel off and bend the rod, thus making it shorter, it will fix your problems. 89 4Runner 3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim Re: Passenger side door problems [Re: Greg_Canada] #863724 01/26/08 07:19 AM Joined: Jul 2006 Posts: 139 VanillaTHUNDA OP Wheeler Problem solved- just bent the rod a bit. Thanks, guys! Moderated by  4Crawler, 4x4Wire, kewlynx  Hop To Mitsubishi Forums ------  Mitsubishi 4x4 and SUV Tech  Mitsubishi Diesels  Mitsubishi ArchiveToyota Forums ------  Early Toyota Trucks  Toyota 4Runner, FJ Cruiser &...  T100 & Tundra Forum  Tacoma Forum  Toyota Tech ArchiveJeep Forums ------  Jeep Talk  Jeep TechIsuzu Forums ------  Isuzu 4x4 & SUV Talk  Isuzu 4x4 & SUV Tech  Isuzu DieselsKia Forums ------  Kia Talk  Kia Sportage & Sorento TechOff Topic Chat ------  4x4 Gallery  Off-Topic Chat  Recreational Access & Land ...  Politics4xForums ------  Outdoor Gear  General 4x4 Discussion  Tools and Fabrication  General Communications  Amateur Radio  GPS and MapsParts Bin ------  Private Party - Garage Sale  Private Party - Items wanted  Vendors, Hot Deals, Group Buys4x4Wire Back Yard ------  Suzuki Forum  AZ Crawler Crew  Cal-Nev Crew  General Ford 4x4 & SUV Forum  General Dodge 4x4 & SUV Forum  General Chevy 4x4 & SUV ForumFeedback & Testing ------  Problems, Questions, Suggestions4x4Wire Staff ------  Forum Moderators  Problem Threads Print Thread Switch to Threaded Mode 5 Excellent 4 Good 3 Average 2 Bad 1 Terrible View Profile Private Message Follow User Forum Posts View Profile Private Message Follow User Forum Posts View Profile Private Message Homepage Follow User Forum Posts View Profile Private Message Homepage Follow User Forum Posts View Profile Private Message Follow User Forum Posts

Default Style 4x4-lt-blue 4x4-new Forum Rules · Mark All Read Contact Us · 4x4Wire TrailTalk

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.